The ATMO pneumatic actuator not only boasts excellent quality and a wide range of specifications, but also incorporates several innovative features. In recent years, the engineering team has adopted a modular stacking design concept, integrating a sliding clutch mechanism and a threaded screw push-pull mechanism on the basis of the traditional actuator, successfully developing the ATMO series pneumatic actuators equipped with a handwheel. These actuators now feature additional practical functions such as manual operation, multi-stroke selection, and multi-point positioning.
●Operating medium: Dry or lubricating air, or filtered non-corrosive gas. The maximum particle diameter must be less than 30um.
●Working pressure: The pneumatic pressure of the actuator is 2 to 8 Bar.
●Working temperature:
T0: NBR O-ring, -20° to 80°;
T1: Viton O-ring, -15° to 150°;
T2: LNBR O-ring, -40° to 80°;
T3: LNBR-R O-ring, -50° to +80°;
T4: P-Silione O-ring, -60° to +80° (non-explosive environment)
●Environmental temperature:
T0: NBR O-ring, -20° to +65°;
T1: Viton O-ring, -15° to +150°;
T2: LNBR O-ring, -40° to +65°;
T3: LNBR -R O-ring, -50° to +65°;
T4: P-Silione O-ring, -60° to +65° (Ex Il 2G Ex h IIC T6 Gb; Ex Il2D Ex h IIB T85° Db and Ex Il 2G Ex) h IIC T3 Gb: Ex II 2D Ex h IIB T165° Db)
●Travel and Adjustment: Standard travel range is 0° to 90°. Adjustment range: The positions at 0° and 90° can be adjusted by the bolts on the body by ±5°. Any position within the range of 5° to 85° can be adjusted and limited by the external handwheel.
●Operating Environment: Standard coating (the cylinder body is treated with hard anodizing, and the end cover is coated with polyester) is suitable for non-corrosive environments. Nickel-phosphorus or polytetrafluoroethylene (PTFE) coatings can be selected for harsh or corrosive environments.
Chemicals, Electric Power, Food Processing, Paper Manufacturing, Textiles, Pharmaceuticals, Steel, Water Treatment.
